The EIC Accelerator – March ’25 cut-off

We will present all the data and stats for the March 2025 cut-off which was the first of the year. Besides, we will use the infographics from our special report to highlight some interesting patterns stemming from our data distribution analysis.

March data & stats

In the first cut-off of 2025, 150 companies were invited to the face-to-face – F2F interview, representing 16% of the 959 Full Applications – FAs. This is a significant decrease compared to the 36% recorded in 2024. Of these, 40 companies were selected, accounting for 28% of those invited to the F2F interview and 4% of the 959 FAs submitted in March.

Most of the funding, as expected, went to Blended Finance projects.

The 40 selected companies came from 16 countries. Germany led with 7 selected companies. Spain, Sweden and the Netherlands made it to the top 3.

Germany ranked first in the total amount of funding too, while Sweden earmarked more than Spain and the Netherlands.

The table above is our famous “matrix” where you can find the breakdown per country, by funding type, and all the cumulative figures.

23% of the selected companies were led by a female CEO. Both selected Irish companies had one, France two out of three and the Netherlands two out of four

Data distribution analysis | March 2025 cut-off

In this section, we will use some of the infographics available in our report where we focus the analysis on data distribution. For all the data points, industry classification and methodology, please refer to the specific sections of the report.

Manufacturing has overtaken life sciences as the most funded industry in March 2025 – growing from 16% in 2024 to 29% in March 2025. Life sciences still receives a significant portion of funding and energy remains the third most-funded industry.

The trend remains that most companies funded are less than 5 years in operation, rising from 53% in 2024 to 60% in March 2025. Even fewer companies more than 10 years in operation were funded, decreasing to 13% from 17%.

Similarly, the majority of companies funded – 82% – have between 6 and 50 employees.

Lastly, the distribution by the last private funding round type has shifted slightly to the left, focusing more on companies raising earlier funding rounds. In March 2025, there was no company that was funded following a Series C or a listing.

Thank you for reading. To get our insights directly in your inbox, subscribe now.
Related insights

Navigation

european association of innovation consultants whiteWe Support the European Innovation Council Code of Conduct emblem with EU flag on purple background

Subscribe to our newsletter to stay up to date on EIC and other funding opportunities

© 2025 Copyright Lira Ltd. 42 Pearse St, Dublin, Ireland :: LinkedIn

INNOSUISSE
START-UP INNOVATION PROJECTS

Start-up Innovation Projects is a grant-funding programme for Swiss start-ups planning on bringing to market a new, science-based product or service.
Source: Innosuisse
WHO CAN APPLY?

Swiss start-ups that meet the following criteria:

  • Have developed a new product or service that is pre market entry
  • Have a scalable business model
  • Have a positive initial FTO assessment
  • Established for <5 years (<10 years in exceptional cases)
  • Max. 50 FTEs
  • Have the financial means to cover 30% of project costs
How to apply?

Start-ups can submit their applications on an ongoing basis on Innolink, the Innosuisse application platform.

For each thematic subgroup, there are four Innovation Council meetings per year. To enter the next round of meetings, start-ups should submit their applications at least eight weeks in advance. After the meeting date, a decision is communicated within 8 weeks.

innosuisse step2

Companies successful on the first step will be invited to pitch in front of experts and members of the Innovation Council. Companies will receive an invite within two weeks of the pitch date. Following the pitch, the Innovation Council will inform the start-up of approval or rejection.

If approved, the start-up will receive a subsidy contract from Innosuisse before the project starts.

MEETING & PITCH DATES

Energy & Environment Engineering ICT Life Sciences Social Sciences & Business Management
Meeting 06.03 04.03 11.03 09.03 05.03
Pitch 26.03 25.03 25.03 25.03 18.03

 Energy & EnvironmentEngineeringICTLife SciencesSocial Sciences & Business Management
Meeting22.0520.0520.0519.0521.05
Pitch05.0603.0603.0610.0628.05

Energy & Environment Engineering ICT Life Sciences Social Sciences & Business Management
Meeting 11.09 09.09 09.09 15.09 10.09
Pitch 25.09 23.09 23.09 28.09 17.09

Energy & Environment Engineering ICT Life Sciences Social Sciences & Business Management
Meeting 27.11 25.11 25.11 19.11 25.11
Pitch 11.12 09.12 09.12 03.12 03.12
call key details
Single applicants

Project Duration:
Max 36 months

Grant Funding:
No ceiling
Funding rate
70%
Contact us

Contact us to learn more about the Innosuisse Start-up Innovation Projects

Life Cycle Assessment

Lira is now part of the EIC Service Catalogue. EIC beneficiaries can now avail of Lira's Life Cycle Assessment service and cover up to 50% of the costs through grants offered by the EIC Service Catalogue.

You can find more information about our LCA service on the EIC Service Catalogue website here.

Contact us if you are interested in learning more about how we can assist you.
Our approach

Sustainability is built on three different levels, each equally important:

Venn diagram showing overlap of social, environmental, and economic impact with related icons in each section
our methodology
  1. Ambition → stating clearly what the aims and objectives for the LCA study are, as well as its scope and main assumptions
  2. Data collection and understanding → rigorous collection of technical, economic and social data , identification of inputs and outputs of the product system, modelling of the complete process (from cradle to grave)
  3. Benchmarking → definition of the benchmark in the product/process domain, quantification of the benchmark impacts
  4. Assessment → The main impact categories are selected, classified, grouped and normalized in order to aggregate results to determine the impacts
  5. Interpretation and Improvements → The results are summarized, the alternatives are compared, solutions to reduce the impacts are recommended
  6. Communication → strategies to promote and communicate the main results are defined
Decision Supporting Tool

We develop decision support tools that rigorously models the entire product and process value chain. By comparing this model with industry benchmarks, we can identify the process steps that have the greatest impact. This enables us to propose and test targeted solutions aimed at mitigating these impacts effectively.

Environmental lca

Based on:

ISO 14040:
Environmental management – Life cycle assessment – Principles and framework

ISO 14044:
Environmental management – Life cycle assessment – Requirements and guidelines

Chart showing environmental impact categories linked to human health, ecosystems, and resource availability damages.
Life Cycle Costing - LCC
  • Analysis of CAPEX and OPEX
  • Identification of direct and indirect cost
  • Profit and Loss projections
  • Cash-flows planning
  • Regional Assessment
  • Identification and analysis of the key financial metrics
Cycle diagram showing cost stages: Initial Cost, Service Cost, Preventative Maintenance Cost, Operating Cost, Disposal Cost.
Social LCA
  • Social analysis based on the European Sustainability Reporting Standards (ESRS)
  • Identification of relevant stakeholders and social topics
  • Data collection
  • Comparison with sector benchmarks
  • Identifying solutions for improvement
Diagram showing the social well-being sustainability pillar with categories: safety, security, and tranquillity; autonomy; equality; participation and influence, each linked to related indicators.
Holistic approach
Diagram showing the relationship between LCC, E-LCA, S-LCA, and sustainability analysis involving economic, environmental, social, and socio-environmental aspects.

EIC Pre-accelerator

The EIC Pre-Accelerator is a new and strategic initiative under the Horizon Europe Work Programme 2025, specifically designed to boost innovation potential in widening countries.
What is the EIC Pre-accelerator?

The call is exclusively for SMEs established in widening countries, which include:

Who and how to apply?
  • Mono-beneficiary applications only (single applicant)
  • Small and Medium Enterprises (SMEs) established in widening countries
  • Deep-tech focus: Must work on cutting-edge technology with transformative potential
  • Start from TRL 4 (technology validated in lab)
Development stages from technology validation in lab to demonstration in relevant environment (TRL 4 to TRL 6).
Application process
call key details
Budget:
€40mn

Project Duration:
24 months

Deadline:
18/11/2027
 
Grant Funding:
Max €1mn
Funding rate
70%

EIC STEP Scale UP

The EIC Strategic Technologies For Europe Platform (STEP) Scale Up supports the development and manufacturing of critical technologies. It does so by offering high amounts of investments (€10mn to €30mn) to promising companies driving game-change innovation in these critical areas. This support should help them secure larger equity funding rounds to further scale their business. In 2027, this funding scheme has a budget of €290mn.
Source: EIC STEP
Who can apply to the EIC STEP Scale Up?

Companies interested in applying must meet the following criteria:

  • The proposed technologies must bring an innovative, emerging, and cutting-edge element with significant economic potential and must reduce or prevent strategic dependencies of the EU.
  • The investment request to the EIC STEP Scale Up should be between €10mn and €30mn, and it should catalyse a major funding round 3 to 5 times the EIC investment.
  • The application must include a non-legally binding pre-commitment for equity investment from a qualified investor that represents min. 20% of the total target funding round.
  • Companies must not be directly or indirectly controlled by a non-associated third country or by a legal entity established in a non-associated third country.

The call targets technologies and innovations within the categories listed below.

Advanced semiconductorsMicroelectronics, including processors; photonic including high energy laser technologies; high frequency chips; semiconductor manufacturing equipment at very advanced node sizes; space-qualified semiconductor technologies
Artificial intelligenceAI algorithms; high performance computing (HPC); cloud and edge computing; data analytics technologies; computer vision, language processing, object recognition; privacy-preserving technologies (e.g., federated learning)
QuantumQuantum computing; quantum cryptography; quantum communications; Quantum Key Distribution (QKD); quantum sensing including quantum gravimetry; quantum radar; quantum simulation; quantum imaging; quantum clocks; metrology; space qualified quantum technologies
Advanced connectivity, navigation, and digitalSecure digital communications and connectivity, such as RAN (Radio Access Network) & Open RAN (Radio Access Network), and 5G and 6G; cyber security technologies including cyber- surveillance, security and intrusion systems, digital forensics; internet of things and virtual reality; distributed ledger and digital identity technologies; guidance, navigation, and control technologies, including avionics and maritime positioning, and space-based PNT; satellite-based secure connectivity
Advanced sensing technologiesElectro-optical, radar, chemical, biological, radiation and distributed sensing; magnetometers, magnetic gradiometers; underwater electric field sensors; gravity meters, and gradiometers
Robotics and autonomous systemsAutonomous habited and uninhabited vehicles (space, air, land, surface, and underwater), including swarming; robots and robot-controlled precision systems; exoskeletons; AI-enabled systems

Sustainable alternative fuels Sustainable alternative fuels technologies
Other nuclear Other nuclear technologies
Wind and electric propulsion technologies for transportation Wind propulsion technologies; electric propulsion technologies
CO2 transport and utilisation CO2 transport technologies; CO2 utilisation technologies
Transformative industrial technologies for decarbonisation Transformative industrial technologies for decarbonisation
Biotech climate and energy solutions Biotech climate and energy solutions
Renewable fuels of non-biological origin Renewable fuels of non-biological origin technologies
Energy system-related energy efficiency Energy system-related energy efficiency technologies; heat grid technologies; other energy system-related energy efficiency technologies
Other renewable energy Osmotic energy technologies; ambient energy technologies, other than heat pumps; biomass technologies; landfill gas technologies; sewage treatment plant gas technologies; other renewable energy technologies
Hydropower Hydropower technologies
Solar Solar photovoltaic technologies; solar thermal electric technologies; solar thermal technologies; other solar technologies
Nuclear fission Nuclear fission energy technologies; nuclear fuel cycle technologies
Electricity grid Electricity grid technologies; electric charging technologies for transportation; technologies to digitalise the grid; other electricity grid technologies
Carbon capture and storage Carbon capture technologies; carbon storage technologies
Sustainable biogas and biomethane Sustainable biogas technologies; sustainable bio-methane technologies
Hydrogen Electrolysers; hydrogen fuel cells; other hydrogen technologies
Heat pumps and geothermal energy Heat pump technologies; geothermal energy technologies
Battery and energy storage Battery technologies; energy storage technologies
Onshore wind and offshore renewable Onshore wind technologies; offshore renewable technologies

Advanced materials, manufacturing and recyclingTechnologies for nanomaterials; smart materials; advanced ceramic materials; stealth materials; safe and sustainable by design materials; additive manufacturing; digital controlled micro-precision manufacturing and small-scale laser machining/welding; technologies for extraction; processing and recycling of cri- tical raw materials and other components (e.g. catalyst, batteries), including hydrometallurgical extraction, bioleaching, nanotechnology-based filtration, electrochemical processing and black mass
Technologies vital to sustainability such as water purification and desalinationPurification and desalination technologies
Circular economy technologiesTechnologies for the reuse and recycling of electronics (e-waste); circular bioeconomy technologies (e.g., for converting waste to valuable bio-based materials or energy)

DNA/RNAGenomics; pharmacogenomics; gene probes; genetic engineering; DNA/RNA sequencing/synthesis/amplification; gene expression profiling, and use of antisense technology; large-scale DNA synthesis; new genomic techniques; gene drive.
Proteins and other moleculesSequencing/synthesis/engineering/manufacturing of proteins and peptides (including large molecule hormones); improved delivery methods for large molecule drugs; proteomics; protein isolation and purification; signalling; identification of cell receptors; developing polyclonal products.
Cell and tissue culture and engineeringCell/tissue culture; tissue engineering (including tissue scaffolds and biomedical engineering); cellular fusion; marker assisted breeding technologies; metabolic engineering; cell therapies; bioprinting of cells/replacement organs
Process biotechnology techniquesFermentation using bioreactors; biorefining; bioprocessing; bioleaching; biopulping; biobleaching; biodesulphurisation; bioremediation; biosensing; biofiltration and phytoremediation; molecular aquaculture; protection and decontamination including human decontaminating agents; biocatalysis, novel test techniques suitable for high throughput screening; process improvement and delivery optimisation for biopharmaceuticals and advanced therapy medicinal products
Gene and RNA vectorsGene therapy; viral vectors
BioinformaticsConstruction of databases on genomes; protein sequences; modelling complex biological processes; including systems biology; developing personalised genomics
NanobiotechnologyApplication of the tools and processes of nano/microfabrication to build devices for studying biosystems and applications in drug delivery, diagnostics, manufacturing.
How to apply?
Flowchart showing the full application process with required documents, eligibility check, results in 4-6 weeks, and go/no-go decision.

Applicants have to upload/submit on the EU Funding and Tenders Portal:

  • A 50-page business plan, including information on the company’s ownership and financial structure and a justification on the STEP-related objectives;
  • A 15-slide pitch deck;
  • A pre-commitment from a qualified investor;
  • Financial Plan;
  • FTO analysis
  • CVs

Applications will be reviewed in batches (one round of reviews every quarter) and applicants will be informed of results 4-6 weeks before the Face-to-Face Interview.

Full application deadlines 2027:
28/01
29/04
06/09
24/11

Companies successful on the first step will be invited to the second step, a Face-to-Face Interview in front of a max. 6-person jury. The EIC will inform applicants of results within 2 weeks of the interview. The outcome may be one of three possibilities: 1) GO and Sovereignty (STEP) Seal; 2) NO GO and Sovereignty (STEP) Seal; and 3) NO GO.

If GO, companies will go through due diligence and a negotiation on the investment agreement with the EIC Fund.

Women TechEU

Women TechEU is a grant funding programme designed to support leading deep-tech, women-led start-ups based in EU and Horizon Europe Associated Countries. The programme offers funding and tailored business support services.

160 women-led deep-tech start-ups will be selected across 4 competitive cut-off deadlines, with 40% of the funding at each deadline reserved for start-ups from widening regions.
Source: Women TechEU
WHO SHOULD APPLY?

To apply, you must:

  • Be a woman founder or co-founder of an early- stage deep-tech start-up and hold a top management position (CEO, CTO, CSO or equivalent) in the company
  • Have women holding at least 25% of the company’s shares at the time of submission
  • Have your company registered and established in an EU Member State or Horizon Europe Associated Country for at least 6 months and a maximum of 5 years at the time of the submission date
  • Have raised <€1M in equity funding
  • Have yet to reach a high fidelity MVP, with your technology currently between Technology Readiness Level (TRL) 4 and 6 (both inclusive)
Development stages from technology validation in lab to demonstration in relevant environment (TRL 4 to TRL 6).
What activities can the programme support?

Applicants are free to decide and indicate which activities are required to accelerate the development, growth, and sustainability of the business. Examples include:

  • Business development
  • Update and consolidation of business plan and growth strategy
  • Business model validation
  • Update of financial plan
  • Certifications
  • IP strategy and freedom to operate
  • Commercial plan
  • Market analysis
  • Customer validation and technical/clinical assessment
  • Finding partners and investors, etc.
How to apply?

The programme runs through a two-stage application process:

1. Eligibility Strand

An online application form to verify eligibility, submitted via the Sploro platform.

The Eligibility Strand runs with weekly cut-offs every Tuesday*, from a first cut-off on 30 June 2026 until a final cut-off on 14 June 2027.

Results are communicated within a week.

If the Eligibility Strand application is non-eligible, you can reapply 3 times

2. Full Proposal Strand

The Full Proposal is also submitted via the Sploro platform. It comprises of the following:

  • Online application form
  • 3-minute video pitch
  • Investor pitch deck
  • CVs of the woman founder or co-founder and the team

There are 3 cut-offs in 2027 for the Full Proposal Strand:

  • 14/01*
  • 01/04*
  • 08/07*

Results are communicated within 8 weeks.

If the Full Proposal application is rejected, you can reapply 2 times.

*All cut-offs are at 17:00 CE(S)T (Brussels time).

call key details
Budget:
€12mn (2026-2028)

Grant:
€75k fixed lump sum
Funding rate
100%
CONTACT US

Contact us to learn more about the Women TechEU programme.

EIC Transition

EIC Transition aims at maturing both technology and business ideas thus increasing technology and market/commercial readiness, supporting several different pathways beyond fundamental research.
Source: EIC Transition
Who and how to apply for the EIC Transition?
Single applicants

The EIC Transition is a 2-step process.

Proposals of 22 pages.

Deadline: 14/09/2027

Development stages from technology validation in lab to demonstration in relevant environment (TRL 4 to TRL 6).
Application Process

EIC Transition is restricted to proposals based on results generated by the following eligible projects: 

  • EIC Pathfinder projects;
  • ERC Proof of Concept projects funded under Horizon Europe;
  • RIA funded under Horizon 2020 Societal challenges and Leadership in Industrial Technologies and under Horizon Europe pillar II;
  • RIA funded under Horizon Europe Research Infrastructures.
call key details
Budget:
€92M

Project Duration:
1 to 3 years

Deadline:
14/09/2027

Max Project Funding:
€2.5M
Funding rate
100%

EIC Pathfinder

The EIC Pathfinder funding scheme is part of the European Innovation Council’s efforts to support groundbreaking research and innovation. It aims to promote high-risk, high-reward projects that have the potential to lead to significant technological advancements. The scheme focuses on early-stage, visionary ideas that can pave the way for future innovations.
Source: EIC Pathfinder
Who and how to apply for the EIC Pathfinder?

The EIC Pathfinder Open: Consortia of min 3 partners
The EIC Pathfinder Challenge: Single applicants or consortia of min 2 partners

The EIC Pathfinder Open is a 2-stage 3-step process.
The EIC Pathfinder Challenge is a 1-step process.

The EIC Pathfinder Open has 2 deadlines in 2027: 25/02 for Stage 1 and 16/09 for Stage 2
The EIC Pathfinder Challenge has 1 deadline in 2027: 29/09

Technology Readiness Levels 1 to 4 showing progression from basic principles observed to technology validated in lab.
Open Call
Budget:
€166M

Deadline:
Stage 1: 25/02/2027
Stage 2: 16/09/2027

Grant / Equity:
Grants of max. €4M
Funding rate
100%
Challenge Call
Budget:
€82M

Deadline:
28/10/2026


Grant / Equity:
Grants of max. €4M
Funding rate
100%
APPLCIATION Process
Challenge Topics

This Challenge focuses on the development of a new generation of advanced materials,
including nanomaterials, specifically engineered to possess and exhibit novel
properties, superior to conventional materials, that can contribute to Europe’s strategic
autonomy in energy across the three main pillars – energy generation, storage and
transmission.


The Challenge supports the ambitions of the European Commission’s Clean Energy
Investment Strategy 51 and its Communication “Advanced Materials for Industrial
Leadership”52, which identified an urgent need to boost the development of advanced
materials to enhance the EU’s strategic autonomy in strategic fields while addressing
sustainability, circularity and safety issues.


Specific Objectives

Applicants to this Challenge must identify, develop and validate in the lab, devices
based on cutting-edge novel advanced materials, demonstrating significantly
enhanced performance. They should address one of the three pillars of the electricity
system:

  • Energy generators, based on breakthrough concepts for energy generation with
    substantially enhanced efficiency, durability, and cost-effectiveness and reduced
    utilisation of CRMs.
  • Energy storage systems characterised by a sharp increase in energy density, life
    cycle, safety, and sustainability. The resulting storage systems must be focused on
    ensuring that future grids, which will be characterised by high renewable penetration,
    decentralisation, and demand flexibility, can address challenges surrounding stability,
    reliability, and resilience.
  • Next generation energy transmission grids with substantially boosted efficiency
    utilising innovative technologies that can dramatically reduce energy losses, improve
    capacity, and enhance grid resilience.


All projects must ensure that their proposed innovations are designed for practical
implementation in devices or systems intended for grid integration. AI approaches may
be implemented to accelerate the development of advanced materials, ideally
leveraging European AI engines with data stored in Europe.

The Challenge targets interlinked risks arising from post-deployment learning, including, but not
limited to, distribution drift, normative drift57 , catastrophic forgetting, compounding errors, and
vulnerabilities such as hallucinations, poisoning, and sensor failures. Addressing these, including
maintaining auditability over time, is essential for trust, safety, and accountable AI deployment.

Specific Objectives

The main objective of the Challenge is to develop the scientific foundations, methods, and validation
assets that enable continual learning in open worlds for reliable AI models/agents deployed on
cloud, edge, or hybrid infrastructures.
Proposals should demonstrate the applicability of their approach across at least two distinct
application domains or deployment settings — spanning reliable AI agents, adaptive robotics,
digital twins, and safety-critical systems, with application domains left open (e.g. industry, health,
education, public services, etc.) — or provide a scientifically justified rationale for single-domain
validation.
Approaches should also address robust decision rules under non-stationarity (e.g., calibrated
uncertainty, adaptive thresholds, and abstention/escalation) and the safe incorporation of newly
discovered classes/concepts without uncontrolled drift or full re-engineering (including
rollback/quarantine when evidence is insufficient). Proposals should explain how the safety and
assurance of post-deployment updates will be demonstrated and governed in their intended
deployment context.


Proposals should contribute to one or more of the following specific objectives, organised by
capability:


Capability 1 — Open-World Novelty Management
Open-set recognition, unknown detection, shift diagnosis, calibrated uncertainty, adaptive decision
rules (including thresholds), and abstention/escalation policies.


Capability 2 — Reliable Continual Adaptation
Methods balancing stability and plasticity; prevention of catastrophic forgetting and harmful drift;
safe incorporation of newly discovered classes/concepts; monitor--detect--adapt--verify--rollback
loops for long-lived agents.


Capability 3 — Memory, Grounding, and Verification

  • Memory: Long-term memory structures and management (provenance, conflict handling,
    revision/quarantine) that support adaptation while preventing compounding errors and
    corruption. Where relevant, memory and update mechanisms may assess the provenance
    and reliability of learning signals before their incorporation.
  • Grounding: Continuous grounding of concepts, decisions, and actions to trusted evidence
    (tools, sensors, databases, simulators, rules/constraints) and detection of de-grounding
    after updates.
  • Creativity58: Safe exploration, hypothesis generation, and planning to accelerate adaptation
    under novelty, paired with verification/constraint checking and risk-aware exploration
    policies.


Capability 4 — Robustness, Security, and Resilience under Non-Stationarity
Defences against poisoning/adversarial manipulation, including prompt injections where relevant,
under non-stationarity; safe degradation and recovery, including sensor degradation and partial
observability for physical agents.

This Challenge will address the energy cost of creating and
consuming quantum coherence. Quantum systems such as photonic platforms,
superconducting circuits, neutral atoms and trapped ions are the building blocks of
upcoming quantum processors. Their energetic assessment will allow for the
quantification of the energetic cost of processing quantum information, including
computation, communication, sensing and metrology tasks. By establishing a framework
that characterises these fundamental processes behind the exchange of energy of
elementary quantum processors, this Challenge will help to develop energy efficient open
quantum systems, and to support the classical to quantum transition60 61.


Specific Objectives


The overall goal of this Challenge is to develop energy efficient quantum technologies to
enable responsible deployment, and benchmark them against relevant, comparable
systems. Applicants to this Challenge can focus on one, and only one of the following 3
areas:


1. Full-stack quantum computing

The applicants should develop low-power quantum computing architectures, compilers
and algorithms and energy-efficient error correction schemes to minimise overhead while
enabling reliable, large-scale computation. Approaches may include circuit optimisation,
minimisation of gate count and circuit depth, improvements in error correction efficiency,
hybrid algorithm convergence, and the design of practical and basic scenarios to minimise
the energy costs of quantum processes.


Applicants should also:

  • define energy-based metrics for full stack quantum computing to measure and
    establish benchmarks for:
    • energy per task; energy required to reach a target fidelity (quantum) and a
      target error rate (classical)
    • total energy: power by runtime for quantum and classical systems, including
      energy consumed by post-processing steps such as classical optimisation, error
      mitigation, decoding, or data analysis as appropriate
    • derive fundamental bounds for energy consumption
  • establish standardised full-stack energy benchmarks comparable to classical data
    centres by:
    • accounting energy consumption in quantum processor (qubits), error
      correction, control and readout electronics, classical co-processing,
      infrastructure (especially cooling)
    • quantifying energy cost per logical qubit and energy overhead of fault tolerance
      (critical for large scale systems)
    • for FTQC, the relevant benchmark should focus on demonstrating a competitive
      energy advantage over state-of-the-art quantum solutions rather than classical
      counterparts


2. Quantum communication
Develop energy-efficient quantum communication technologies, such as low-power
quantum repeaters and photonic quantum memories, to establish secure, long-distance
quantum networks with minimal energy consumption by defining quantum
communication energy efficiency by e.g. counting energy per secure bit (e.g., QKD),
compared to classical encryption overhead.

3. Quantum sensing
Develop miniaturised, portable ultra-low-power quantum sensors achieving superior
precision and sensitivity by establishing benchmarks for quantum sensing sensitivity per
watt and energy per measurement precision.
Starting at TRL 2, projects must clearly achieve a proof of concept by demonstrating
energetic advantages in quantum computing, communication or sensing and validating
the scientific basis of the breakthrough. Projects must reach TRL 3-4 with prototypes or
testbeds that empirically show lower energy consumption than classical counterparts (or
competitive energy advantage over state-of-the-art quantum solutions for FTQC) for the
targeted use cases.

EIC Accelerator

The EIC Accelerator is a funding scheme designed for high potential, high risk start-ups and scale-ups developing deep tech. In 2027, the overall budget is €578mn split in Open and Challenge calls. Open calls are for companies from any industry, while Challenge calls have specific topics. The EIC Accelerator funding includes a grant component of up to €2.5mn and/or equity of up to €10mn.
Source: EIC Accelerator
How to apply for the EIC Accelerator?
The EIC Accelerator follows a structured 3-step process.
Flowchart of the Short Proposal step showing submission requirements, evaluation by 4 experts in 4-6 weeks, and go/no-go decisions based on evaluator majority.

Applicants have to submit on the EU Funding and Tenders Portal:

  • 12-page short proposal;
  • A 10-slide deck; 
  • A 3’ video.

Four remote expert evaluators will review the documentation and decide whether it has merit to advance to the full proposal stage. The outcome of the evaluation will be sent to the applicant within 4 to 6 weeks from the date of the submission. Only short applications that receive 3 GOs out of 4 from the evaluators will be invited to submit a full proposal. 

Flowchart showing the full proposal step, including documents needed, tech expert assessment, evaluation panel, and invitation decision.

Four cut-off dates are planned for 2027:

  • 20/01
  • 17/03
  • 01/09
  • 04/11

The full proposal is submitted for review by both a technical expert evaluator and an evaluation panel composed of at least three independent experts.

The technical evaluator will examine the proposal in detail and conduct an online meeting with the applicants. The findings of this assessment will be included in a report, which will be sent to the evaluation panel.

Each independent expert within the evaluation panel will assess the proposal. The panel will then deliberate, taking into account both the individual expert assessments and the technical evaluator’s report, to determine the final score for the proposal.

Upon completion of the selection process, a ranked list of full proposals will be produced, identifying the companies invited to participate in the face‑to‑face interview stage.

Flowchart showing step 3 Face-to-Face Interview with pitch and Q&A, EIC jury decision, and results within 2-3 weeks leading to GO or NO GO.

The Face-to-Face Interview serves as the conclusive step in the EIC Accelerator process. It offers companies a unique opportunity to engage with a distinguished jury panel holding the authority to determine the companies selected for the EIC Accelerator.

During a comprehensive interview, the initial 10 minutes are dedicated to the pitch deck previously submitted as part of the full proposal. The interview then entails a question-and-answer session.

Following the interview, companies can expect to receive notification regarding the final outcome of their application within approximately two to three weeks. Prepare diligently for this impactful interview as it serves as the ultimate determinant for securing funding through the prestigious EIC Accelerator programme.

Open Calls
Budget
€428mn

Deadlines
Short proposal deadline: Continuous

Full proposal deadlines 2027:
20/01 :: 17/03 :: 01/09 :: 04/11

Grant / Equity
Grants of max. €2.5mn and /or Equity of max. €10mn
Funding rate
70%
Challenge Calls
Budget
€150mn

Deadlines
Short proposal deadline: Continuous

Full proposal deadlines 2027:
20/01 :: 17/03 :: 01/09 :: 04/11

Grant / Equity
Grants of max. €2.5mn and /or Equity of max. €10mn
Funding rate
70%
Challenge Topics

This Challenge complements these efforts by supporting start-ups and SMEs in
accelerating market-creating innovations for advanced ocean observation technologies
that deliver sustained, scalable, cost-effective, and high-resolution monitoring
solutions. This will in turn transform these technologies into a scalable, integrated, dual
use, and service-oriented industry.

Specific Objectives

The start-ups and SMEs to be supported under this Challenge must develop and deploy
deep-tech innovations that will address one (or more) of the following priorities:

  • Autonomous ocean observation systems: advanced sensor networks across the
    surface, water column, and seabed; autonomous marine vehicles; long-endurance
    and connected systems; innovative underwater communication technologies; and
    smart, adaptive observation capabilities.
  • Integrated ocean observation and mapping systems: multi-platform and multi
    scale systems enabling high-resolution ocean mapping and persistent observation.
  • AI-ready and interoperable data ecosystems: AI-driven ocean data analytics
    platforms, FAIR datasets, and integration of heterogeneous data streams to support
    predictive modelling and operational services.
  • Persistent and connected observation capabilities: scalable systems with potential
    applications across civil, environmental, economic, and security domains, including
    advanced sensing and adaptive AI strategies.
  • Scalable biodiversity monitoring: strengthened biological and environmental
    monitoring through eDNA-based approaches and AI-enabled species and habitat
    detection.


Applicants are encouraged to engage relevant end users, including, as appropriate, those
delivering weather forecasts and climate services, shipping, fisheries and aquaculture,
offshore energy, telecommunications, insurance, environmental protection and
restoration and pollution in order to accelerate market uptake and deployment.

Indicative budget: EUR 30 million

 

This Challenge competition focuses on deep-tech solutions including Nature-based
Solutions (NbS) and engineering approaches.

Specific Objectives

The start-ups and SMEs to be supported under this Challenge must look to develop
and deploy deep-tech innovations that will address one of the following priorities:

  • Energy and Buildings: Climate-neutral solutions that address greenhouse gas
    emissions from the built environment through decarbonisation of energy use,
    supply, and management. Proposals could include solutions such as, but not limited to:
    • retrofitting and improving the energy efficiency in existing buildings, which
      could include new concepts mimicking nature to strongly reduce energy
      consumption
    • integration of renewable energy sources and energy storage systems to
      achieve grid flexibility: grid architectures able to connect diverse,
      decentralised sources like solar, wind, and hydropower to the grid and to
      store (in stationary or EV batteries and/or thermal storage) and deliver
      energy from renewables, possibly using local direct current microgrids at
      low/medium voltage smart energy management to harness the waste heat
      from buildings, transport, and industry via smart thermal networks, phase
      change materials, or heat-exchange hubs to power districts, and smart
      bidirectional charging of EV batteries to exploit energy surplus at the district
      level (for buildings)
    • expanding the range of technologies for long-term energy storage and
      recovery, increasing their efficiency, and broadening their areas of
      application.
  • Transport and Mobility: Solutions aimed at decarbonising the urban mobility and
    transport sector with a specific focus on public transport. Proposals could include
    solutions such as, but not limited to:
    • smart bidirectional charging stations (V2G) for smart charging to integrate
      renewable electricity and reduce pressure on the grid by optimising energy
      use between electric vehicles and the grid
    • autonomous SAE L4158 mobility solutions that can improve public transport
      efficiency, safety and accessibility
    • congestion reduction, traffic management and reducing empty trips
      leveraging digital technologies including AI, edge-computing or novel
      sensing to optimise traffic flows
    • real-time data fusion, simulation and predictive modelling as well as analytics
      for smoother transitions to sustainable urban multimodal mobility
  • Resource Management: Supports deep-tech including NbS solutions that enable
    the implementation of circular resource management practices. Proposals could
    include solutions such as, but not limited to:
    • recycling and reuse of urban waste streams such as construction debris, heat
      and e-waste and organic matter into high-value materials through advanced
      recycling and upcycling
    • improving water resource planning and management and better processing
      of wastewater to improve access to clean water


To support the development of deep-tech solutions that can be deployed at scale,
applicants are strongly encouraged to engage with at least one of the cities that are
part of the Climate-Neutral and Smart Cities Mission and secure a clear commitment,
in the form of a letter of intent underlining interest in the proposed solution. Where
required, connections to these cities can be facilitated through the Cities Mission
Platform.


Where appropriate, applicants could also explore potential synergies with relevant
projects and solutions supported by the Driving Urban Transitions (DUT) Partnership.

Indicative budget: €30mn

This Challenge, supported by a transfer of budget from Euratom Research and Training
Programme, will therefore support SMEs and start-ups advancing new fusion reactor
concepts and key enabling technologies for fusion power plants.

Specific Objectives

The start-ups and SMEs to be supported under this Challenge must focus on one or
more elements of the fusion value chain including:

  • Alternative concepts: magnetic, inertial and magneto-inertial fusion, either at the
    system level (conceptual or engineering design) or the design of core components
    and technologies
  • Advanced materials: these encompass materials for components that must
    withstand extreme conditions of e.g. temperature, heat flux, plasma particle flux and
    neutron load, corrosion, and mechanical stress
  • Sustainable and stable fuel production: innovative concepts for enabling tritium
    production and a closed tritium fuel cycle in fusion power plants
  • New laser technologies: high-power, high-repetition-rate laser systems, along with
    allied optics, to enable fuel compression and ignition in inertial confinement fusion
  • New components /systems for Plasma: innovative components/systems for
    effective plasma heating and current drive
  • Magnets: innovative components and design approaches for magnets capable of
    operating under fusion power plant conditions, including high heat and radiation
    tolerance and structural strength
  • Advanced Digital Technologies: includes the use of AI and machine learning
    techniques as well as digital twins to facilitate the design, control, monitoring and
    operation of future fusion power plants, and
  • Targets for inertial confinement fusion: Advancing target design and materials to
    address current limitations in target performance and target insertion into the
    experimental/reactor chamber.
  • Other key enabling technologies for fusion power plants not mentioned above will
    also be considered.

Indicative budget: EUR 20 million

This Challenge has the twin objective therefore of supporting the EU’s climate targets
and ensuring industrial value chain resilience by supporting technologies for carbon
removal and utilisation.

Specific Objectives

The start-ups and SMEs to be supported under this Challenge must look to develop
and deploy deep-tech innovations that will address one (or more) of the following
priorities:

  • Technologies for carbon dioxide removal (CDR): this encompasses permanent
    carbon removal and carbon removal with carbon storage in products as defined by
    the CRCF Regulation. This includes DACCS, BioCCS, BCR as described in the
    delegated regulation (EU) 2026/285 as well as carbon removal approaches that do
    not yet have a CRCF methodology such as, but not limited to, enhanced rock
    weathering, direct ocean capture, alkalinity enhancement, and CO2 mineralisation
    in products. Activities can cover one or more parts of the removal value chain
    (capture, transport, storage); for carbon capture technologies, this means direct air
    or ocean carbon capture or capture from biogenic or mixed biogenic waste streams.
  • CO2 capture and utilisation technologies (CCU): this is agnostic with respect to the
    source of carbon and focuses on converting captured carbon into fuels, chemicals,
    and materials, alongside agriculture, food and feed uses (e.g., methanol, synthetic
    natural gas, proteins, fertilisers).
  • Technologies for quantifying, monitoring and verifying the environmental impact,
    such as carbon removal/ reduction impact, methane leakage emissions etc.


Selected beneficiaries will gain access to tailored Business Acceleration Services,
including facilitated access to the EU CRCF Buyers’ Club175 for carbon removal. This will
facilitate engagement with a network of committed private buyers of carbon removal,
supporting the generation of future revenues and strengthening the underlying
business case.


Further, applicants may wish to consider engaging with European Securities and
Markets Authority (ESMA) recognised carbon ratings agency, to provide an
independent assessment of the carbon removal potential of their projects.


Solutions focused on storing captured fossil CO2 as a gas without chemical
transformation and hydrogen production technologies are not within the scope of this
Challenge.

Indicative budget: €50mn